Introduction

Note

Use of accessories not manufactured or supported by

KONICA MINOLTA will void your warranty.

" This chapter provides information about the following accessories.

Dual In-Line

256 MB, 512 MB DIMM

Memory Module

(DDR-SDRAM, 266 MHz, 184 pins, No ECC, Unbuf-

(DIMM)

fered, CL=2 or 2.5)

Duplex Option

Auto duplexing

 

 

Lower Feeder Unit

500-sheet tray included

(Tray 3/4)

 

Hard Disk Kit

40 GB Hard Disk

 

 

Compact Flash

256 MB, 512 MB, 1 GB

 

 

Note

Installing accessories always requires that the printer and accessories are turned off and unplugged during installation.

Antistatic Protection

Note

It’s very important to protect the printer controller board from electrostatic damage while performing any task involving the controller board.

Turn off all power switches first. If an antistatic wrist strap is provided in your printer option kit, attach one end of it to your wrist and the other end to the bare metal chassis on the back of your printer. Never attach the wrist strap to any piece of equipment with an electrical current present. Plastic, rubber, wood, painted metal surfaces, and telephones are not acceptable grounding points.

If you don’t have an antistatic wrist strap, discharge your body’s static electric charge by touching a grounded surface before you handle any printer boards or components. Also avoid walking around after grounding yourself.

226

Introduction