Konica Minolta C30P TRAY3, TRAY4, ITY, OFF, 1-UP, QUAL, NESS, +15%, +15%, PAPER, PAPER, IMAGE, PRINT, SOURCE, LAYOUT, MARGIN, BRIGHT, ON/OFF, MINIMUM, ECONOMY, /MINIMUM, STANDARD

" All factory default values are shown in bold.

PAPER	Settings	TRAY1/TRAY2/TRAY3/TRAY4
SOURCE
	Select the Lower Feeder Unit that is used for camera direct
	printing.
	"TRAY3 and TRAY4 appear only if the optional lower
	feeder units are installed.
LAYOUT	Settings	1-UP/2-UP/3-UP/4-UP/6-UP/8-UP
	Specify the number of images printed on a single sheet of media.
	When set to 1-UP, only one image will be printed on a single
	sheet of media.
PAPER	Settings	STANDARD/MINIMUM
MARGIN
	Select the size of the media margins (area that is not printed in).
	If STANDARD is selected, the standard media margin size is
	specified.
	If MINIMUM is selected, the media margins are reduced.
IMAGE	BRIGHT-	Settings	-15%/-10%/-5%/0%/+5%/+10%/
QUAL-	NESS		+15%
ITY
		The brightness of the printed image can be
		adjusted.
	CONTRAST	Settings	-15%/-10%/-5%/0%/+5%/+10%/
			+15%
		The contrast of the image can be adjusted.
	ECONOMY	Settings	ON/OFF
	PRINT
		Select whether to print graphics with a reduced
		density by reducing the amount of toner that is used.
		If ON is selected, the amount of toner used is
		reduced when printing.
		If OFF is selected, the amount of toner used is not
		reduced when printing.
		"If GLOSSY MODE is set to ON, the amount of
		toner used is not reduced when printing, even
		if ON was selected for this menu item.

Configuration Menu Overview 69