Replacing a Print Unit

When replacing a print unit, refer to the following table. For optimum print quality and performance, use only approved KONICA MINOLTA print units for your specific printer type, as listed in the table below. You can find your printer type and the print unit part numbers on the consumables reorder label inside the front cover your printer.

Printer

Printer Parts

Print Unit Type

Print Unit Parts

Type

Number

 

Number

 

 

Print Unit - Black (K)

A031

00J

 

 

 

 

 

EU

A011 024

Print Unit - Yellow (Y)

A031

05J

Print Unit - Magenta (M)

A031

0AJ

 

 

 

 

Print Unit - Cyan (C)

A031

0GJ

 

 

 

 

 

" “I-UNIT” displayed in the control panel refers to the print unit.

Note

Do not touch the OPC drum surface. This could lower image quality.

P

USH

Y

If I-UNIT LOW on the SYS DEFAULT MENU/ENABLE WARNING is set to ON, the message I-UNIT LOW X (where “X”. represents the color of the toner) appears when a print unit becomes empty. Follow the steps below to replace the print unit.

" You are advised to replace the indicated print unit when the message I-UNIT LIFE X appears.

1 Check the message window to see which color print unit needs replacing.

Replacing Consumables

139