5

Configuring printer driver settings Chapter 5

Configuring printer driver settings

How to edit a watermark

1 To edit a watermark, click the name of the watermark to be edited from the Watermark list.

2 Make any settings you want.

3 To create a new watermark, type the desired text in the box. 4 Click the [New] button.

Note

Watermark text can be up to 20 characters long.

You can have up to 31 different watermarks configured at one time. (in- cluding “<None>”)

Delete

Click this button to delete the watermark that is selected in the list.

Shading

Specify a relative density for the watermark text between 10 % and 100 %.

Style

Use these check boxes to turn bold style and italic style on (check box se- lected) or off (check box cleared).

Italic:

Italic text

Bold:

Bold text

Font

Use the settings in this group box to specify the typeface and the point size of the watermark text.

Type Face:

You can specify any of the typefaces currently installed on your computer’s operating system as the typeface of the watermark text.

Size:

Specify text size between 8 and 200 points.

Angle

Use this setting to specify the angle of the watermark text relative to the pa- per. The setting range is -90° to +90°.

A negative (-) value rotates the characters clockwise, 0 specifies the text should be parallel to the paper, and a positive (+) value rotates the characters counterclockwise.

5-14

IC-205

Page 55
Image 55
Konica Minolta IC-205 manual How to edit a watermark, Style