Using PageScope Web Connection Chapter 7
| 7 | Using PageScope Web Connection |
|
|
7.7Logging in as an administrator
Some of the settings available in PageScope Web Connection can only be changed by an administrator. These settings are only displayed when you log in to the administrator mode.
Logging in to administrator mode
1 Enter the administrator password in the “Admin Password:” box at the left of the screen.
2 Click the [Login] button to log in to the administrator mode.
3 To log out again, click the [Logout] button.
Note
The default password for administrator mode is “sysadm”.
Be sure to change the administrator password before using administrator mode.
The machine cannot be used while you are logged into PageScope Web Connection with administrator mode.
In addition, if the machine is being operated, the administrator cannot log on.
After logging on with Administrator mode, you will automatically be logged off if no operation is performed for ten minutes.
