Service Manual M695

Replacing modules

Doc Code 636 718

09/93 3691 - DMF

 

 

 

Replacing swingarm cable

Screw off cover ring (1) and cut off cable tie (2) from cable duct (3).

Remove 2 screws (4) and extract plug plate (5) complete with Lemo plug.

Open AMP plug and push contact pins out to the rear.

Pull cable out from swingarm.

Note:

Tie a 1.5-metre long string to the cable so that it is easier to pull in.

Assembly:

Bundle together the contact pins of the new cable and bind them with adhesive tape. Raise the swingarm to its highest position and pull in the cable.

Secure cable duct (3) with a cable tie, one metre away from the AMP plug.