Removing and replacing the front bezel
This procedure describes how to remove and replace the frontbezel.
1. Remove the computer cover. See “Removing the cover” on page 117.
2. Remove the front bezel by releasing the three plastic tabs inside the chassis and
pivoting the bezel outward. Carefully set the bezel to the side without
disconnecting the power switch and LED assembly cable.
3. Toreinstall the bezel, align the plastic tabs on the right side of the bezel with
the corresponding holes in the chassis, then pivot it inward until it snaps into
position on the left side.
4. Go to “Completing the FRU replacement” on page 147.
118 Hardware Maintenance Manual