Replacing the CMOS battery
This procedure describes how to remove and replace the CMOS battery.
If the CMOS battery fails, the date, time, and configuration information (including
passwords) are lost. An errormessage is displayed when you turn on the
computer.
Important
Refer to “Safety notices (multi-lingual translations)” on page 7 for information
about replacing and disposing of the battery.
CAUTION:
When replacing the lithium battery,use only Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer.
1. Remove the computer cover. See “Removing the cover” on page 117.
2. Locate the battery.See the system board illustration for your machine type at
“System board connectors” on page 116.
3. Youmight have to remove any PCI adapters that impede access to the battery.
4. Remove the old battery.
5. Install the new battery.
6. Replace any PCI adapters that were removed.
Note: When the computer is turned on for the first time after battery
replacement, an error message might be displayed. This is normal after
replacing the battery.
7. Go to “Completing the FRU replacement” on page 147.
146 HardwareMaintenance Manual