Diagnostic error codes

Refer to the following diagnostic error codes when using the diagnostic tests. See

“Running tests” on page 47 for the specific type for information about the

Diagnostic programs.

In the following index, Xcan represent any number.

Diagnostic Error Code FRU/Action
000-000-XXX
BIOS TestPassed
No action
000-002-XXX
BIOS Timeout 1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 786
2. System board
000-024-XXX
BIOS Addressingtest failure 1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 786
2. System board
000-025-XXX
BIOS Checksum Valueerror 1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 786
2. System board
000-026-XXX
FLASH data error 1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 786
2. System board
000-027-XXX
BIOS Configuration/Setup error 1. Run Setup
2. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 786
3. System board
000-034-XXX
BIOS BufferAllocation failure 1. Reboot the system
2. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 786
3. Run memory test
4. System board
000-035-XXX
BIOS Reset Condition detected 1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 786
2. System board
000-036-XXX
BIOS Register error 1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 786
2. System board
56 HardwareMaintenance Manual