Diagnostic Error Code FRU/Action
000-038-XXX
BIOS Extension failure 1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 786
2. Adapter card
3. System board
000-039-XXX
BIOS DMI data error 1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 786
2. System board
000-195-XXX
BIOS Testaborted by user
Information only
Re-start the test, if necessary
000-196-XXX
BIOS test halt, error threshold exceeded 1. Press F3 to review the log file
2. Re-start the test to reset the log file
000-197-XXX
BIOS test warning 1. Make sure the component that is called
out is connected and/or enabled. See
Chapter6, “Using the Setup Utility,” on
page 51
2. Re-run test
3. Replace the component that is called out
in warning statement
4. Replace the component under test
000-198-XXX
BIOS test aborted 1. Make sure the component that is called
out is connected and/or enabled. See
Chapter6, “Using the Setup Utility,” on
page 51
2. Flash the system and retest. See
“Updating (flashing) BIOS from a
CD-ROM or diskette” on page 786
3. Go to “Undetermined problems” on page
82
000-199-XXX
BIOS test failed, cause unknown 1. Go to “Undetermined problems” on page
82
2. Flash the system and re-test
3. Replace component under function test
000-250-XXX
BIOS APM failure 1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 786
2. System board
000-270-XXX
BIOS ACPI failure 1. Flash the system. See “Updating
(flashing) BIOS from a CD-ROM or
diskette” on page 786
2. System board
001-000-XXX
System TestPassed
No action
001-00X-XXX
System Error
System board
001-01X-XXX
System Error
System board
Chapter7. Symptom-to-FRU Index 57