Diagnostic Error Code FRU/Action
005-198-XXX
Videotest aborted 1. If a component is called out, make sure
it is connected and/or enabled. See
Chapter6, “Using the Setup Utility,” on
page 51
2. Flash the system and re-test. See
“Updating (flashing) BIOS from a
CD-ROM or diskette” on page 786
3. Go to “Undetermined problems” on page
82
005-199-XXX
Videotest failed, cause unknown 1. Go to “Undetermined problems” on page
82
2. Flash the system and re-test. See
“Updating (flashing) BIOS from a
CD-ROM or diskette” on page 786
3. Replace component under function test
005-2XX-XXX
005-3XX-XXX
Videosubsystem error
1. Videocard, if installed
2. System board
006-000-XXX
Diskette interface TestPassed
No action
006-0XX-XXX
Diskette interface error 1. Diskette drive Cable
2. Diskette drive
3. System board
006-195-XXX
Diskette interface Testaborted by user
Information only
Re-start the test, if necessary
006-196-XXX
Diskette interface test halt, error threshold
exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
006-197-XXX
Diskette interface test warning 1. If a component is called out, make sure
it is connected and/or enabled
2. Re-run test
3. Replace the component that is called out
in warning statement
4. Replace the component under test
006-198-XXX
Diskette interface test aborted 1. If a component is called out, make sure
it is connected and/or enabled
2. Flash the system and re-test. See
“Updating (flashing) BIOS from a
CD-ROM or diskette” on page 786
3. Go to “Undetermined problems” on page
82
006-199-XXX
Diskette interface test failed, cause unknown 1. Go to “Undetermined problems” on page
82
2. Flash the system and re-test
3. Replace component under function test
006-25X-XXX
Diskette interface Error 1. Diskettedrive cable
2. Diskette drive
3. System board
62 HardwareMaintenance Manual