Using the control panel | 20 |
Selecting and locking a font
The printer data stream may contain control codes which select a particular font. To override the codes, you can select and lock a particular font of your choice.
1To select a font, press Font repeatedly until you see the font light on next to the selection you want.
Power | Ready | Tractor 2 | Paper |
|
|
| Out |
Start/Stop | LineFeed | FormFeed | |
Tear Off |
| Load/Unload | Tractor |
Font |
| Courier | Orator |
|
|
| |
|
| Prestige | Script |
|
| Gothic | Draft |
Lock |
| Presentor | Fast Draft |
2Continue pressing Font until the Font Lock light comes on, and the font you want is selected. The font is locked until the printer is turned off.
Disabling Font Lock
1To disable Font Lock, press Font repeatedly until the Font Lock light turns off and the font you want is selected.
2If the printer is offline, press Start/Stop.
The printer is ready to print when the Ready light comes on.
