Using the control panel | 21 |
The printer data stream may contain control codes which select a particular pitch. To override the codes, you can select and lock a particular pitch of your choice.
1To select a pitch, open the control panel to layer 2.
1 | 2 | 3 | 4 |
Power
Set TOF | LineFeed | Macro |
Micro | Micro | Setup |
Pitch | 10 | 20 |
|
| |
| 12 | 24 |
| 15 |
|
Lock | 17 |
|
2Press Pitch repeatedly until the pitch light comes on next to the pitch you want.
3Continue pressing Pitch until the Pitch Lock light comes on and the pitch you want is selected. The pitch is locked until the printer is turned off.
1To disable Pitch Lock, press Pitch repeatedly until the Pitch Lock light turns off and the pitch you want is selected.
2Close the control panel.
3If the printer is offline, press Start/Stop.
When the Ready light comes on, the printer is ready to print.