Loading paper | 25 |
If you have already set your Top‑Of‑Form and now want to change the Tear Off position, follow these steps:
1Press Start/Stop to take the printer offline.
2Press and hold Tear Off until the printer beeps. The 
light blinks.
3Open the control panel cover to access layer 2.
4Press Micro 
or Micro to move the paper to the desired Tear Off position.
5Close the control panel cover.
The printer beeps twice. The paper rolls backward, then goes to the new Tear Off position.
6Press Start/Stop.
The paper remains at the current Tear Off position until you send another job to the printer. The paper moves from the Tear Off position to the Top‑Of‑Form and begins printing.
Loading continuous paper
Loading continuous forms using the push tractor
You can load continuous paper utilizing four different paper paths, depending on whether you have the push tractor installed or the pull tractor installed. The factory default setting for your printer is the push tractor position.
Note: If you have installed the optional Auto Sheet Feeder or Tractor 2, see the documentation that came with your option for paper loading instructions.
1Turn the printer on.
2Make sure the paper path is clear.
Note: If a cut form or envelope is loaded in the printer, press FormFeed to remove it.
