Understanding Setup mode and menu options | 47 |
Understanding
Setup
mode and menu options
The printer is preset at the factory for font, pitch, form length, and other settings. These are called factory default settings. This chapter describes how to change the factory default settings, how to set up macros, and how to set form length.
Using Setup mode
Note: Make sure continuous forms are loaded in the printer when using Setup mode.
1Open the control panel to access layer 2.
1 | 2 | 3 | 4 |
Power
Set TOF | LineFeed | Macro |
Micro | Micro | Setup |
Pitch | 10 | 20 |
|
| |
| 12 | 24 |
| 15 |
|
Lock | 17 |
|
1 | 2 | 3 | 4 |
Power
Set TOF | LineFeed | Macro |
Micro | Micro | Setup |
Pitch | 10 | 20 |
|
| |
| 12 | 24 |
| 15 | P5 |
Lock | 17 |
|
2Press Setup to put the printer in Setup mode and print the Main menu.
3Press LineFeed to print a list of available options you can change.
To Select | Press |
|
|
Exit and Save Setup | Set TOF |
|
|
Print All | LineFeed |
Forms Macro Options Macro
