Printing
Paper handling
Maintenance
Troubleshooting
Administration
Index
Setting up the network printer 34
Look under the NetWare heading on the network setup page to see if the NetWare protocol is turned on (activated) in the print server.
If NetWare is turned off, use the IPX protocol to activate it. Select the printer and then select the NetWare task. Check the Enable box to activate NetWare.
2Find out if the print server is servicing your NetWare queue. Use one of the utilities and look for your queue in the list of queues being serviced. In the Network Printer Utility for NetWare, select Options, and then Queues Serviced.
3If your queue doesn’t appear in the list of queues being serviced, reset the printer, wait a few minutes, and look for the queue in the list again.
4If your queue still does not appear in the list of queues being serviced, you have a print server setup problem. Reconfigure the MarkNet print server.
5Try printing from some other application. If the job prints from the second application, you’ve narrowed the problem to the first application. Make sure you are using the current version of the driver for the problem application.
6Place a job in the queue using a Novell utility such as PCONSOLE.
www.lexmark.com
Lexmark E320/E322 Printer
