Setting up the network printer 36

Printing

Paper handling

Maintenance

Troubleshooting

Administration

Index

5If prompted to select a PPD (PostScript Printer Description), you need to install the proper PPD from the drivers CD. To do this, launch the CD, click Installer, select the appropriate PPD for your printer, and then click Install. Go back to the Chooser and try to create the new printer again.

Note: A PPD describes the printer or printer family. For example, the PPD lists which options are valid for the printer.

6Look for an icon in the Chooser next to the printer name. This means you have successfully set up the new printer and a new desktop printer icon is on your desktop.

7In the Chooser, select the printer you want to use and then close the Chooser window.

Changing the zone

If you want to change the zone of the new printer using MarkVision, find the printer in the main MarkVision window, select it from the list and choose Adapter Settings.

1If you haven’t already done so, install MarkVision. On the drivers CD, click Install printer software. Do a Custom Install and select MarkVision.

2Launch MarkVision.

3Click View, and then Select Zones.

4Select the zone that contains the new printer.

www.lexmark.com

Lexmark E320/E322 Printer

Page 36
Image 36
Lexmark 322, 320 setup guide Changing the zone