LG Electronics LRG30355ST, LRG30855ST Using the GAS Surface Burners, Before Lighting a GAS Burner

O P E R AT I N G I N S T RU C T I O N S

USING THE GAS SURFACE BURNERS

Throughout this manual, features and appearance may vary from your model.

BEFORE LIGHTING A GAS BURNER

•Make sure all burners are in place.

•Make sure all grates on the range are properly placed before using any burner.

AFTER LIGHTING A GAS BURNER

•Do not operate the burner for an extended period of time without cookware on the grate. The finish on the grate may chip without cookware to absorb the heat.

•Be sure the burners and grates are cool before you place your hand, a pot holder, cleaning cloths or other materials on them.

IN CASE OF POWER FAILURE

In case of a power failure, you can light the gas surface burners on your range with a match. Hold a lit match to the burner, then push in and turn the control knob to the LITE position. Use extreme caution when lighting burners this way.

Surface burners in use when an electrical power failure occurs will continue to operate normally.

HOW TO LIGHT A GAS SURFACE BURNER

SEALED GAS BURNERS

•Make sure all the surface burners are placed in their respective positions.

•Push the control knob in and turn it to

the LITE position.

•You will hear a little clicking noise— the sound of the electric spark igniting the burner.

Push the control knob

in and turn it to

the LITE position.

Your gas range cooktop has five sealed gas burners. They offer convenience, cleanability and flexibility to be used in a wide range of cooking applications.

The smallest burners are in the right rear and

center positions. These burners can be turned

•Turn the knob to adjust the flame size. If the knob stays at LITE, it will continue to click.

•When one burner is turned to LITE, all the burners spark. Do not attempt to disassemble or clean around any burner while another burner is on. An electric shock may result, which could cause you to knock over

hot cookware.

down to LO for a very low simmer setting. They provide precise cooking performance for delicate foods such as sauces or foods that require low heat for a long cooking time.

The medium (left rear) and the large (left front) burners are the primary burners for most cooking. These general-purpose burners can be turned down from HI to LO to suit a wide range of cooking needs.

The extra large burner (right front) is the maximum output burner. Like the other four burners, it can be turned down from HI to LO for a wide range of cooking applications.

This burner is also designed to quickly bring large amounts of liquid to

a boil. It has a special SUPER BOIL™ setting designed to be used with cookware 10 inches or larger in diameter.

Extra-large

burners only

9