Installation 23
Setting the Menu Using the Remote Control Buttons
Remote | Description | |
Control | ||
|
Use these buttons to select the menu options or adjust the options value.
Select the option or confirm the setting.
Return to the previous menu or level.
1.Press SETUP to display the setup menu.
2.Use w/sto select the desired menu item, then press OK to display the submenu.
3.Use w/sto select the desired submenu item, then press OK to display the setting options.
4.Use w/sto select the desired option then press OK to set the value.
5.Use a/dto select the desired setting then press OK to confirm your selection.
6.Press BACK repeatedly to exit the Setup menu.
If the save message appears, select [OK] and press OK to save the settings.
NOTE
All the operation explanations are based on using the remote control.
System settings
Properties
3
Installation
•System Name: Enter the system name by using alphabetic letter, numeric digit and symbols up to 21 characters. The number of maximum characters is depends on the language.
•Language: Select a language for the setup menu and information display.
•Button Beep: Marks up to activate the button beep. The button beep is activated when using the buttons.
•Resolution: Sets the output resolution of the video signal.
•Configuration Import: Import the system configuration data from the USB memory stick.
•Configuration Export: Export the configuration data from this system to the USB memory stick.
•Factory Default: You can reset the system to its original factory settings. Some options cannot be reset (date, time, daylight saving, time zone and user password settings).
