LG Electronics LRN3040N Series owner manual Daily/Weekly backup, Up to 2 TB

Installation 27

Daily/Weekly backup

1.Connect the USB device for backup.

2.Select WEEKLY or DAILY on the schedule options.

3.Select the backup device.

4.Enter the date and/or time to start backup on the schedule start option.

5.Enter the day of week and/or time on the Time Range Start option.

6.Enter the day of week and/or time on the Time Range End option.

7.Select the [Estimation Size] icon and press OK.

8.Check the size of selected data and free space of USB device. If the USB device does not have enough space, change the USB device to a USB which has enough space or erase data of the connected USB device.

NOTE

•The backup function is not supported on the external USB CD-ROM driver.

•Available external device for backup.

Device	Capacity
USB HDD	Up to 2 TB.
E-SATA HDD	Up to 2 TB.

•Use the recommended external USB devices for preventing malfunction (See the page 45.).

•For the latest recommended HDD list, please visit http://www.lgecommercial.com

•An external media has to be formatted on this unit to prevent malfunction.

•You cannot use the [Estimate size], [Start Backup] and [Erase Media] options in backup progressing.

•Do not remove the external device while the backup is in progress, it may cause a malfunction.

•If you format the external media by using a PC with FAT32, the media may not be used on this unit.

•Check the size of the selected data and free space of the external device. If the device does not have enough space, create space on the device or erase the previously stored data.

1.Select the [Estimate Size] icon and press OK.

The size of the selected data and free space is displayed.

2.Select [OK] and press OK to close the window.

•You cannot stop the backup when the backup is in progress.

•The warning message will appear for the conditions listed below.

-- When the start time and end time are the same value. -- When the start time is later than the end time.

-- When you set the time for data that does not exist. -- When the start time and end time setting are wrong. -- A media does not have enough space.

-- When the selected USB device is disconnected.

•You can see the backup progress status on the system control bar.

•The estimated size of backup data is only the approximate size. So you must prepare sufficient space on the media to prevent lack of space.

•At the scheduled recording time, you can check the backup status on the system control bar.

•While export is in progress or searching the backup data from the external USB device, the scheduled backup will not be started. After the export or backup search is finished, scheduled backup will be restarted.

•When you set the schedule backup, the backup data size is estimated from the recording settings of the Setup menu. If the real recorded data size is over the estimated recording data size, the schedule backup may not be activated.

3

Installation