Installation 19

PTZ Camera Control

You can control the cameras connected via Network.

1.Select the PTZ camera channel on the main monitor you want to control.

2.Press PTZ or click the icon that appears when the mouse is moved to PTZ camera's screen.

Virtual PTZ remote control is displayed on the main monitor.

3.Use each item to control the PTZ camera.

Button

Function

 

 

 

Displays the PTZ control guide.

 

 

 

Displays the setup menu of the PTZ

 

camera.

 

 

 

Minimizes PTZ virtual remote control.

 

 

 

Removes the PTZ virtual remote

 

control.

 

 

 

Use to pan/tilt the camera.

 

 

 

You can select the Pan/Tilt/Zoom

 

speed.

 

 

 

You can adjust the camera zoom.

 

 

 

You can adjust the focus of a camera

 

manually.

 

 

 

You can adjust the iris of a camera

 

manually.

 

 

 

Displays or disappear the preset

 

control options in the virtual PTZ

 

remote control

 

 

 

Displays the Selected Preset number.

 

 

 

To input the preset number.

 

 

y

To register preset positions.

 

r

To delete a memorized preset

position.

t

To move the camera to the preset

position.

u

To start a preset tour.

 

 

Confirm the preset position.

 

 

NOTE

You can use some options by clicking the right button of the mouse in PTZ camera control mode.

PTZ Control Guide: Shows the guide for using the mouse.

Exit: Exits from the PTZ camera control mode.

Preset Settings

Preset position is the function to register camera monitoring positions (preset positions) associated with position numbers. By entering the position numbers, you can move cameras to the preset positions.

NOTE

To activate this function, you need to register the preset positions of the PTZ cameras.

ONVIF preset may not be operated properly with this unit.

To Register Preset Positions

1.Move the camera to a point you wish by using the ,,, buttons.

2.Press SET or click the yicon.

3.Select the preset number you wish to register.

4.Press OK or click the icon. The position and its number are memorized.

5.Repeat steps 1 to 4 to add additional positions.

NOTE

Preset numbers from 0 to 255 are available on this unit but the actual preset range differs depending on PTZ cameras.

Changing to a Picture in a Preset Position

The following function is available only with cameras provided with the preset function. The preset function makes the combination camera move to the programmed preset position. It is necessary to program preset positions for the combination camera beforehand.

1.Press the MOVE button or click the ticon.

2.Use number buttons to enter the memorized preset position’s

index number then press OK or click the icon. The camera moves to the preset position and the picture of the camera in that position appears on the monitor.

To Clear the Preset Position

You can clear a memorized preset position.

1.Press the CLEAR button or Click the ricon.

2.Use number buttons to enter the memorized preset index

number then press OK or Click the icon to clear the preset positions.

NOTE

This function may not be available depending on PTZ cameras.

3

Installation

Page 19
Image 19
LG Electronics LRN3040N Series owner manual PTZ Camera Control, Preset Settings, To Register Preset Positions