Installation 29

To register the IP device automatically

1.Click the [AUTO] button.

2.The search window will be displayed and start to search the IP device automatically. By stopping or restarting the search, click [Stop] or [Refresh] button.

3.Click the check box of desired device.

4.Enter the [User Name] and the [Password] and then click the [Add] button. When you select several channels, channels are assigned same ID and password.

5.Confirm the result of authentication on the [Verify] option.

O: The verification is valid.

X: The verification is invalid. Check the ID and password again.

XX: Connection failed.

6.Click the check box of confirmed cameras. Selected cameras are registered channel in order.

7.Click the [CLOSE] button to exit the window.

NOTE

The information of search result such as model name, MAC and others may not be shown depending on security level or connection information.

To register the IP device manually

1.

Click the [MANUAL] button.

3

2.

Enter the IP address.

Installation

3.

Click the check box of desired device.

 

4.

Enter the [User Name] and the [Password] and then click the

 

 

[Add] button. When you select several channels, channels are

 

 

assigned same ID and password.

 

5.

Confirm the result of authentication on the [Verify] option.

 

6.

Click the check box of confirmed cameras. Selected cameras are

 

 

registered channel in order.

 

7.

Click the [CLOSE] button to exit the window.

 

NOTE

The Supported IP camera specifications.

Specification

Description

 

 

Driver

LGE, AXIS, ONVIF

 

 

Recording mode

Continuous, Instant, Motion,

 

Sensor

 

 

Video Codec

H.264, MPEG4, MJPEG

 

 

Audio recording and

Support

playback

 

 

 

Resolution

CIF, Half D1(2CIF), D1(4CIF), UXGA,

 

720p, 1080p (Up to 5M)

 

 

Stream

LGE (Master-0, Slave-0)

 

ONVIF (The stream that is

 

supported from camera)

 

AXIS (H.264, MPEG4, MJPEG)

 

 

PTZ

Support

 

 

Sensor/Motion input

Support

 

 

It takes time to search IP devices and the necessary time depends on the network environment.

Page 29
Image 29
LG Electronics LRN3040N Series owner manual To register the IP device automatically, To register the IP device manually