28Installation

Device settings

-- Sensor: Select the sensor number on the drop-down list.

 

 

-- In Use: Marks up when you want to activate the sensor.

 

-- Sensor Type: Select the sensor type.

 

-- Relay Output: Select the relay output number

 

on the drop-down list.

3

Installation

IP Device

--

Relay Type: Select the relay type.

--

Control Duration: Enter the relay time.

 

 

Motion Setting

 

You can configure this option when you select to [LGE] on the

 

[Driver] option. Select [Motion] tab of the [Setup] window.

 

1.

Click the [Add] button. The motion detect window is

 

 

displayed. You can add the five windows maximum for

 

 

motion detection area.

 

2.

Set the [Sensitivity] option.

 

3.

Click the edge or corner of the window box to adjust the

 

 

window size for motion detection.

 

4.

Click the [Save] button to save the settings.

 

Stream Setting

CH: Displays the channel number.

Name: Enter the channel name.

Model Name: Displays the model name of IP device.

MAC: Displays the Mac address of IP device.

IP: Displays the IP address of IP device.

HTTP Port: Enter the HTTP port number. HTTPS is not supported.

/ : You can see other options (Driver, Profile1, Profile2, RTSP Port, RTP Mode, Audio Recording) to click button. To return previous options, click button.

Driver: Selects the IP camera driver from the drop-down list.

Profile1: Select the camera stream on the drop-down box for recording.

Profile2: Select the camera stream on the drop-down box for streaming. For smooth live playback, the resolution of [Profile2] set lower than resolution of [Profile1].

NOTE

If you select to [LGE] on the [Driver] option, select the [Stream] tab. When you select [ONVIF] on the [Driver] option, you can configure the stream setting only. In case of [AXIS], the [Bitrate] and the [Compression] options are activated only.

-- Stream (LGE only): Select the video stream.

-- In Use (LGE only): Click to activate the stream function.

-- Video Codec: Select the video mode (Codec) from the dropdown list.

-- Resolution: Select the output image size of the camera.

-- Frame Rate: Set the frame rate of the image.

-- GOP: It means “Group of Pictures”. The higher the GOP, the better is the video quality of the camera. Edit the value of GOP from 1 to 30. This setting is valid for H.264 video format only.

NOTE

It recommended that you set the [GOP] value same as [Frame Rate].

• When you select full screen mode on the [split mode],

-- GOV (ONVIF only): It means “Group of VOPs”. The VOP is an

image frame in the MPEG-4 video stream. Edit the value of

[Profile1] operate for streaming automatically.

GOV from 1 to 30.

• When CPU usage occupies more than 90% and then 1 minute

-- Quality: Select the Quality.

goes by, connection of [Profile2] is limited for the stability of

-- Stream Quality (LGE only): If the [Quality] option set to VBR,

system.

this option is displayed. Select the stream quality from the

 

• RTSP Port: Enter the RTSP port number.

drop down box, the camera supports five types. (Highest,

High, Medium, Low and Lowest)

• RTP Mode: Select the RTP mode from drop-down list.

-- Bitrate: If the [Quality] option set to CBR, this option is

• Audio Recording: Check the audio recording option.

displayed. Edit the bit rate value from 256 kbps to 10 240

• Setup: Click the check box of the desired channel and then

kbps.

press the [Setup] button. The setup window will be displayed.

-- Compession (AXIS only): Enter the compression ratio of

Audio/Sensor setting

video. The lower value you set up, the higher definition

You can configure this option when you select to [LGE] on the

picture you get.

• Delete: Click the check box of the desired channel and then

[Driver] option. Select [Audio/Sensor] tab of the [Setup] window.

-- Audio In: Click the check box if you want to send the audio

press the [Delete] button. Registered channel of IP Camera will

be deleted.

from the microphone input connector.

 

-- Audio Type: Select the codec when you send the audio from

 

the microphone input connector.

 

-- Audio Out: Click the check box to output the audio from the

 

speaker.

 

Page 28
Image 28
LG Electronics LRN3040N Series Device settings, IP Device, Motion Setting, Stream Setting, Audio/Sensor setting