LG Electronics LRN3040N Series owner manual Network Streaming, Date/Time Controller

Installation 25

When you want to change DDNS host name		function.
If you want to change the registered host name to new one, follow		• Daylight Saving Start: Select the Daylight Saving start time.
as shown below.
		• Daylight Saving End: Select the Daylight Saving end time.
1.	Enter a new host name in the [Host Name] option.
2.	Press the [Update] button. The confirmation window will be	NTP
	displayed to change your host name.

3.Click the [OK] button. When host name is properly changed, the changed host name will be displayed in the [Registered Host] option. If host name is not changed after updating, please check network connection.

Network Streaming

•CH: Displays the channel number.

3

Installation

•NTP: Marks up, if you want to synchronize the system's date and time with those of the time server called NTP. (Network Time Protocol) Specify the NTP server’s name.

•Time Server: For most cases select public. The system will obtain the average time among 5 public servers (time.nist.gov, time-a. nist.gov, time-b.nist.gov, ntp.nasa.gov, clock.isc.org).

•Private Time Server: Enter the private time server’s IP address or host name using the virtual keyboard.

•Profile: Selects the profile of stream. The [Profile] option is activated in case of IP Camera only.

NOTE

If you need to adjust the image size to send to the client, set the stream option of the [IP Device-Profile1 or Profile2]. And then select the proper Profile from the [Network Streaming- Profile]. You can control the bandwidth value forward to client.

•Sync. Interval: You can set synchronized intervals with the NTP time server to 1 day, 1 week, 1 month and 1 hour.

•NTP Test: Select [NTP Test] to test the NTP server.

NOTE

If the NTP option is not set to this system, there can be a gap between the system time and actual time. Using NTP is recommended.

Date/Time

Controller

•Date: Select the current year, month and day.

•Time: Select the current time.

•Date Format: Select the date display format.

•Time Format: Select the time display format.

•Time Zone: Select the time zone in the area where the system is installed.

•Daylight Saving: Mark up if you want to use the daylight saving

•IR Remote ID: Select the IR Remote ID for this unit. If you use multi systems set the IR Remote ID for each unit.

•Remote Controller ID: Select the Remote Controller ID for this unit. If you use multi systems, set the Remote Controller ID for each unit. You can control the system by using the LKD1000 controller. (For more details refer to the LKD1000 owner’s manual.)