LG Electronics LRN3040N Series owner manual Mail, Emergency

34Installation

Mail

3

Installation	• Notification: Mark up to be notified the unit's operating
	information according to notification settings by e-mail.
	• SMTP Server: Enter the SMTP Server address.
	If notification option is not mark up and the SMTP server option
	is empty, the SMTP Port, User Name, Password and TLS options
	cannot be set.
	• SMTP Port: Enter the SMTP Port Number. Typically the port used
	for SMTP is 25. However in some cases it is better to change this
	port number for added flexibility or security. You can edit this
	port between 1 and 65535.
	• User Name: Enter the user name.
	• Password: Enter the password.
	• TLS: Mark up if you use the TLS (Transport Layer Security)
	function.
	• Mail Address (1 to 3): Enter the mail address.
	You can input up to 3 e-mail addresses.
	• Sender: Enter the sender.
	• JPEG Attachment: Click the check box to send a mail which
	want to attach a JPEG file.
	• E-mail Test: Select [E-mail Test] to test sending an e-mail.

NOTE

•The SMTP server, SMTP port no., user name or password settings are optional. The system can send e-mail directly without the use of an SMTP server or MTA (message transfer agent). In certain cases all e-mail should be forwarded to

a specific SMTP server. Specify the server host name or IP address in such a case. For more detail on SMTP setup, ask your network administrator and/or mail service provider.

•[JPEG Attachment] option is operated when event of [Sensor In], [Motion Detection] and [Text In] is occurred.

•In case of an IP Camera, ONVIF JPEG Snapshot feature must be supported to attach a JPEG file.

Emergency

•Notification: Mark up to be notified the emergency agent about the unit's operating information according to your notification settings.

•Host Name/Port: Enter the Host Name and port number of the emergency agent program. The factory default port for this function is 9002. However in some cases it is better to change this port number for added flexibility or security. You can edit this port between 1025 and 65535.

You can set up to 9 Host Name and port numbers.

SNMP

The Simple Network Management Protocol (SNMP) is an application protocol to exchange the management information of network devices.

•SNMP Version: Selects a SNMP version if SNMP is allowed to access to this device.

•Port: Enter the number for SNMP port.

•Community String (V2 only): Specifies the SNMP management community in which you want to enable this system (e.g. lgecommunity or public).

•User (V3 only): Enter the security name for the SNMP.

•Authentication (V3 only): Select a mode for the SNMP Authentication. (MD5 or SHA)

•Password (V3 only): Enter the password for the SNMP Authentication.

•Privacy (V3 only): Select a privacy mode for the SNMP Authentication. (DES or AES)

•Password (V3 only): Enter the password for the privacy mode.

•Trap IP Address: Specifies the IP address of the computer you intend to use as your network management station and to which SNMP traps will be sent.