| Split System Models |
Figure 24 Electrical field connections, prop fan condensing module |
|
| TOP AIR |
| DISCHARGE MODELS |
(5 Ton High Ambient & | |
disconnect switch | 5 Ton |
HORIZONTAL AIR DISCHARGE MODELS
Class 2 wiring to
evaporator module
Single- or |
|
|
|
| |
electric |
|
|
service; |
| |
|
| |
not by Liebert |
| Single- or |
| ||
| ||
| NEC Class 2 wiring | electric |
| to evaporator | service; not |
| module | by Liebert |
Electric service connection to contactor or terminal block
Single- or
High voltage electric power supply entrance
Low voltage electric power supply entrance
Earth ground connection terminal for field wiring.
NOTE: Refer to specification sheet for full load amp and wire size amp ratings
Factory wired
to components on electric panel.
Heat rejection connection. Field supplied 24V NEC class 2 wiring.
Wire connections from evaporator module:
124V GND
224V Supply
3High Pressure Alarm
4Hot Gas Bypass Connection (only on units with hot gas bypass. If no hot gas bypass, connection is provided in the evaporator module. Connect wire 4 with wire 2 to the 24V supply).
51