CoolTherm
Manual / Bedienungsanleitung
Start at 16°C
air inlet temperature
three- way valve control characteristic (factory setting)
4.Storage and transportation
•Cover open pallets with tarpaulins and protect the components from soiling (e. g. sand, rain, dust, etc.).
•Keep storage temperatures between
•The heat exchanger must be completely drained (to prevent the risk of frost damage)
•When stored for more than 1 year, check the the fan bearings prior to installation. (⇒ Turn fans by hand.)
•CoolTherm can be transported using a forklift truck or crane. For transport using a crane, straps must be used. The CoolTherm weighs, depending on the version, up to 340 kg / 749 lbs. (net weight)
•Avoid twisting the housing or other damage.
•Use suitable tools during installation, e. g. approved scaffolding.
•Prior to lifting the CoolTherm using a crane or forklift truck, close all doors.
•Do not stand under suspended loads.
•Hooks attached to the load must be be of appropriate tensile strength.
•CoolTherm must not be lifted at an angle using a crane.
•All packaging is to be removed prior to commissioning CoolTherm.
CoolTherm | 01_998_330_0_k | page / Seite 17/83 |