CoolTherm
Manual / Bedienungsanleitung
CoolTherm 01_998_330_0_k page / Seite 32/83
The heat exchanger is installed in the reverse order of removal.
Regularly check the condensed water drain and clean if necessary
The CoolTherm may be dismantled by suitably qualified personnel only.
Prior to dismantling:
- Correctly shut down fans and any other elect rical
components and disconnect from power supply!
- Secure against switch on!
- Shut down water cooling circuit and secure against
switch on.
Disconnect the unit from the external water circuit by closing the shut-off valves and d rain the
water circuit in the unit.
Transport the unit as described in "Transportation" section using a lifting device with sufficient load
bearing capacity.
Dispose of the air-conditioner as per the locally applicable disposal and
safety instructions. We recommend using a specialist recycling organisation.
All parts can be stripped down and consist of:
- aluminium, steel, brass, copper
- labelled plastic parts
- electronic parts
All Knürr products are subject to continuous quality control and comply with applicable regulations.
For all questions that you may have in relation to our products, please contact the provider of your
server cabinet system or contact directly: