MAINTENANCE | ||
|
|
|
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
SAFETY PRECAUTIONS
WARNING
•Have qualified personnel do all maintenance and troubleshooting work.
•Turn the engine off before working inside the machine.
•Remove guards only when necessary to per- form maintenance and replace them when the maintenance requiring their removal is com- plete.
•If guards are missing from the machine, get replacements from a Lincoln Distributor. See the EXPLODED VIEW AND PARTS LIST at the back of this manual.
Read the Safety Precautions in the front of this manu- al and in the Briggs & Stratton Operating and Maintenance Instructions manual before working on the
Keep all equipment safety guards, covers, and devices in position and in good repair. Keep your hands, hair, clothing, and tools away from the recoil housing, fans, and all other moving parts when start- ing, operating, or repairing this machine.
ROUTINE AND PERIODIC
MAINTENANCE
ENGINE MAINTENANCE
CAUTION
To prevent the engine from accidentally starting, dis- connect the spark plug lead before servicing the engine.
See Table D.1 for a summary of maintenance inter- vals for the items listed below. Follow either the hourly or the calendar intervals, whichever come first. More frequent service may be required, depending on your specific application and operating conditions. Table D.2 shows engine maintenance replacement parts and numbers.
OIL: Check the oil level after every 5 hours of operation or daily. BE SURE TO MAINTAIN THE OIL LEVEL.
Change the oil the first time after 5 hours of opera- tion. Then, under normal operating conditions, change the oil after every 50 hours or once a year, whichever occurs first. If the engine is operated under heavy load or in high ambient temperatures, change the oil every 25 hours.
Drain the oil from the drain plug located on either side of the engine bottom, as shown in Figure D.1. Refill through the oil fill plug until the oil reaches the top of the fill hole. Use the grade and viscosity recommend- ed in the Engine Owner’s Manual.
FIGURE D.1 - OIL DRAIN AND
REFILL LOCATION
1 | 2 | 3 |
|
|
1.OIL DRAIN PLUG
2.OIL FILL PLUG
3.OIL LEVEL
FUEL: At the end of each day’s use, refill the fuel tank to minimize moisture conden- sation and dirt contamination in the fuel line.
ENGINE ADJUSTMENTS
WARNING
OVERSPEED IS HAZARDOUS - The maximum allowable high idle speed for this machine is 3750 RPM, no load. DO NOT tamper with the governor components or setting or make any other adjust- ments to increase the maximum speed. Severe personal injury and damage to the machine can result if operated at speeds above maximum.
Adjustments to the engine are to be made only by a Lincoln Service Center or an authorized Field Service Shop.
