Cordless Internet Telephony Kit
4Chapter 2: Getting to Know the Cordless Internet Telephony Kit
The Base Station
The Base Station
The Telephony Kit’s Base Station connects to the USB port of your Skype-enabled PC. This unit receives and
transmits the phone signal through your PC and over the Internet through the Skype software.
POWER LED The POWER LED lights up when the Base Station is powered on and ready.
IN USE LED The IN USE LED lights up when the Phone is in use.
PAGE Button Press this button to page your handset. After you locate your handset, press Soft Key #2 on
your handset to stop the page. You will also use this button if you need to register additional
handsets (refer to Chapter 3: Setting Up the Cordless Internet Telephony Kit for more
information).
Figure 2-2: The Telephony Kit’s Base
Station
NOTE: If you move too far away from the Base Station while on a call,
an alarm tone will emit from the Handset and the Base/Handset Link
icon will flash upon its Display Screen. This means your call will be
disconnected if you do not move back within the Base Station’s range.
Further, if a disconnected Handset is outside of the Base Station’s
range for more than 30 minutes, the phone will automatically turn off.