Also, verify that the PC is not in standby/hibernate mode

10.Cannot call ordinary phone number

If 00, + or 011 is omitted, enter 00, + (press and hold 0) or 011 before the number you are dialing. If your SKYPE account has too little or no credit, purchase more credits.

The handset may have lost its link. Verify that the Handset has a link with the Base Station.

11.Busy tone is returned

Either the SKYPE or the PC application have not started, the USB cable is not plugged in, your PC in standby/ hibernate mode, or your other party is offline.

-Make sure both SKYPE and the PC application is/are started on the PC and running properly.

-Make sure the phone is setup correctly.

-Wait for the remote party to be online.

12.Can not hear any sounds from PC speakers while USB base station is plugged in to the PC When the USB base station is plugged in to USB port of your PC, all audio stream will be routed to the handset. Therefore, no audio is heard on the PC speakers. You can change the setting of your PC audio by going into “Control panel, “Sound, Speech and Audio Device” “Sound and Audio Device”, “Audio”, check “Only use default devices”. see also Setting up your PC section in this user guide for more information

Appendix A: Troubleshooting

Cordless Internet Telephony Kit

71

Common Problems and Solutions

Page 78
Image 78
Linksys CIT200 manual Cannot call ordinary phone number