Cordless Internet Telephony Kit
16 Chapter 3: Setting Up the Cordless Internet Telephony Kit
Setting Up the Telephony Kit
3. Connect the Charger’s power plug to a power socket.
4. Place the handset on the charger unit and let the batteries charge for a full 14 hours before using the phone
for the first time.
Turn the Handset on and off
To turn the power on the Handset on or off, simply press and hold the Handset’s End & On/Off button.
Figure 3-2: Handset on Charger
NOTE: Handset may get warm during initial charge.
NOTE: Please note that handset may not turn ON for up to 15 minutes if the batteries are low
NOTE: If you move too far away from the Base Station while on a call,
an alarm tone will emit from the Handset and the Base/Handset Link
icon will flash upon its Display Screen. This means your call will be
disconnected if you do not move back within the Base Station’s range.
Further, if a disconnected Handset is outside of the Base Station’s
range for more than 30 minutes, the phone will automatically turn off.