Cordless Internet Telephony Kit
60 Chapter 4: Using the Cordless Internet Telephony Kit
Managing your Handsets
Managing your Handsets

Register a handset

You can register your phone to up to 4 base units. Each base unit can register up to 4 handsets.
Your handset is registered to the base unit by default and is ready to use. You only have to register your handset
if UNREGISTERED is displayed.
To register your handset when UNREGISTERED:
1. Press REG.
2. Press OK to select REGISTER.
3. Press and hold the PAGE button on the base unit until the light flashes.
4. Enter the PIN code. (Default 0000)
5. Press OK. You will see a confirmation screen when registration is completed.
If registration is successful, the handset will display its name and number. The Base/Handset Link icon, which
indicates the link between your phone and the base unit, will display steadily with the battery icon. This state is
referred as "standby".

NOTE: Your phone must have a link with the base unit in order to use any system features mentioned in this section EXCEPT for

registering a handset.