Lucent Technologies 108522426 Line Buttons, Line Button Lights, Imprinted vs. Programmed Buttons

Understanding Your Direct-Line Console

Line Buttons

All Telephones		Telephones with System Access (SA) Buttons
NNN-XXXX	Make/receive outside calls	SA buttons give you access to inside or
	only.	outside lines for making and/or receiving calls.
Telephones with ICOM Buttons		To make an outside call on an SA button, first
		dial the dial-out code (usually 9) that your
ICOM Ring	Make/receive inside calls	System Manager supplies. No dial-out code is
	and receive inside voice-	necessary when you call another extension.
	announced calls.	SA Ring	Make/receive inside/outside
ICOM Voice	Make inside voice-		ringing calls and receive inside
	announced calls and		voice-announced calls.
	receive inside ringing and	SA Voice	Make/receive outside calls,
	voice-announced calls.		receive inside ringing and
ICOM Originate	Make (not receive) inside		voice-announced calls, and
Only	calls only.		make inside voice-announced
			calls.
		SA Originate	Make (not receive) inside and
		Only	outside calls.

Line Button Lights

Each line button has a red light and a green light next to it. These lights indicate the following:

Light		Meaning
	Steady red	The line you are using or will use when you lift the handset
		or press the Speaker button.
	Steady green	The line is in use, or the feature programmed onto the line
		button is on.
	Flashing green	An incoming call is ringing on this line button or a call you
		transferred is returning to this line button (see p. 11).
	Fast-flashing green	You have put a call on hold on this line button.
	Slow-flashing green	Someone else has put a call on hold on this line button.

Imprinted vs. Programmed Buttons

The following buttons are imprinted on MLX-20L and MLX-28D telephones. You must program them onto 4424LD+ and 4424D+ telephones.

Button	Function
Drop	Press Drop and a line button to disconnect the person on that line from a
	conference call.
Feature	Press Feature to activate the Feature mode.
HFAI	Press HFAI to answer the telephone via the speakerphone without picking up
	the receiver.
Inspect	Press Inspect and a line button to display information about the current or
	ringing call or to see what feature is programmed onto that button.

3