Lucent Technologies 1100 manual Configuring the COM RS-232D Port

Configuration

You can select a menu item by:

■Using a hot key (the number of the menu item).

■Using the arrow up and arrow down keys.

■Pressing the Enter key when your menu selection is highlighted.

Although rare, you may find the display becomes unrecognizable on occasion. If this occurs, press CTRL R to refresh the display.

You can modify the parameters accessed by the menu by pressing:

■The Delete key to erase the highlighted parameter, or the Backspace key to erase the character to the left of the cursor.

■Press the left arrow and right arrow keys to move through the parameter being edited.

■Press the Enter key to accept the changes.

Configuring the COM RS-232D Port

The COM port is for serial data communications. Configuring the COM RS-232D Port describes how to program the RS-232D serial port. All COM port settings should be configured at one time.

Select COM from the menu to access the following sub-menus.

■Data Rate

■Parity

■Data Bits

2-6Issue 1 June 1998