Lucent Technologies 1100 manual Security Alert, Programming Passwords Procedure

Configuration

■Each password begins with two digits (00–99). The “00” password is reserved for the system administrator and can be used to change any of the remaining passwords.

!

Security Alert:

Change your system administrator password as soon as possible, and store the new password in a secure place.

Programming Passwords Procedure

Follow these steps to program passwords for the Remote Module users:

1.If you are already in the DEFINITY Extender 1100 System programming menu, skip to Step 2. If you are not in the programming menu but the unit is powered, simply power down unit, and type “MENU” while the LED flashes yellow to access the programming menu from your PC.

When you type “MENU,” the Main Menu appears:

2.Select Configure System from the Main Menu. The Configure System Menu appears.

3.Select Password from the Configure System Menu, and press Enter.

The screen prompts you to enter your administrator password.

Issue 1 June 1998 2-13