Maxtor 10K V manual 187

Sense	Sense	Sense	Meaning
Key	Code	Qualifier
0x04	0xA0	0xAC	Spin time-out - SETTLE
Hdwe Error
	0xA0	0xAD	Spin time-out - STEADY
	0xA0	0xAE	Spin time-out - FAULT
	0xA0	0xAF	Spin time-out - ETM
	0xA0	0xB0	Spin time-out - ROCKSPINDLE
	0xA0	0xB1	Spin time-out - ANTILOCK
	0xA0	0xB2	Spin time-out - SYNC4BRAKE
	0xA0	0xB3	Diablo shutdown due to high temp
	0xA0	0xB4	VCM wasn’t updated in time
	0xA0	0xB5	Spindle clk is missing
	0xA0	0xB6	Sync-to-Index, servo went dead
	0xA0	0xB7	Sync-to-Index failed
	0xA0	0xB8	No spokes found
	0xA0	0xB9	Seeking too long
	0xA0	0xBA	Potential spindle out od synch
	0xA0	0xBB	fast head switch channel/preamp count mismatch
	0xA0	0xC0	Drive Not Ready, NVR G Image copies corrupt
	0xA0	0xC1	Drive Not Ready, PM section has invalid version id
	0xA0	0xC2	Context acquire timeout
	0xA0	0xC3	Track acquire timeout
	0xA0	0xC4	Head Pin Layer Reversal
	0xA0	0xC5	Heads cannot find servo sync (no PLR but heads with nosyncFound).
	0xA0	0xC6	Could not find sync in the erase band
	0xA0	0xC8	Could not arm Block State Machine, no matching pairs
	0xA0	0xC9	Could not arm Block State Machine, retry exhausted
	0xA0	0xCA	Could not arm Block State Machine
	0xA0	0xCB	OFM logical list synchronization timeout
	0xA0	0xCD	Bias Cal failed during power-up calibrations
	0xA0	0xCE	Gamma Cal failed during power-up calibrations
	0xA0	0xCF	ARCS Cal failed during power-up calibrations

Maxtor Atlas 10K V 5-129