Maxtor 10K V manual Scsi ‘Hard’ Reset Time6 Ms typical

	MAXTOR	MAXTOR	MAXTOR
DESCRIPTION	ATLAS 10K V	ATLAS 10K V	ATLAS 10K V
	73.5 GB	147.1 GB	300 GB
Maximum effective areal	75 Gbits/in2	75 Gbits/in2	75 Gbits/in2
density

Servo Mechanical Timing Specifications:

Sequential Head Switch Time2	0.3 ms read	0.3 ms read	0.3 ms read
	0.5 ms write	0.5 ms write	0.5 ms write
Sequential Cylinder Switch Time3	0.3 ms read	0.3 ms read	0.3 ms read
	0.5 ms write	0.5 ms write	0.5 ms write
Random4 Average Seek (Read)	4.0 ms typical	4.2 ms typical	4.4 ms typical
Random4 Average Seek (Write)	4.5 ms typical	4.7 ms typical	4.9 ms typical
Full Stroke5 Seek (Read)	11.0 ms	11.0 ms	11.0 ms
	typical	typical	typical
SCSI ‘Hard’ Reset Time6	22 ms typical	22 ms typical	22 ms typical
	25 sec	25 sec	25 sec
	maximum	maximum	maximum
Power on to Drive Ready7	25 sec typical	25 sec typical	25 sec typical
Data transfer Rates:
Sequential Throughput	89 MB/s	89 MB/s	89 MB/s
Read/Write	maximum	maximum	maximum
Buffer Size	8 MB	8 MB	8 MB
Reliability:
Seek error rate8	<10 in 108	<10 in 108	<10 in 108
Unrecoverable error rate8	<1 in 1015	<1 in 1015	<1 in 1015
Error correction method	48 Bytes	48 Bytes	48 Bytes
(with cross check)	Reed-Solomon	Reed-Solomon	Reed-Solomon
	with XCHK	with XCHK	with XCHK
Contact Start/Stop Cycles	50,000 min.	50,000 min.	50,000 min.
Auto head-park method	Magnetic Latch	Magnetic Latch	Magnetic Latch

Note: Seek time is defined as the time required for the actuator to seek to a new position and settle on a track. It is measured by averag- ing the execution time of a minimum of 1000 operations of the indicated type as shown in Table 4-1. The seek times include head settling time, but do not include command overhead time, time spent reading or writing data, or rotational latency delays. Unless otherwise specified, read/seek command settling criteria is assumed.

4-2 Maxtor Atlas 10K V