Maxtor 10K V 5.9.2.5Device Identification Page (83h) (SCSI-3ONLY), 5.9.2.4ASCII Implemented Operating Definition Page (82h)

5.9.2.4ASCII Implemented Operating Definition Page (82h)

The ASCII Implemented Operating Definition page returns the character string's length (1Bh) in byte 4, followed by the appropriate character string (“SCSI-3, SCSI- 2, SCSI-1/CCS” in bytes 5 through 31 for Parallel SCSI. This is described in Table 5-32.

Table 5-32ASCII Implemented Operating Definition Page - Data Format

Bit	7	6	5		4		3	2	1	0
Byte
0	Peripheral Qualifier = 0						Peripheral Device Type = 0
							(Direct Access Device)
1					Page Code (82h)
2						Reserved
3					Page Length = 1Ch
4				ASCII String Length = 1Bh
5 - 31			“SCSI-3, SCSI-2, SCSI-1/CCS” + byte of 0

5.9.2.5Device Identification Page (83h) (SCSI-3 ONLY)

The Device Identification Page provides the means to retrieve zero or more identification descriptors that apply to the logical unit (Table 5-33and Table 5-34).

Table 5-33Device Identification Page - Data Format

Bit	7		6		5		4	3	2	1	0
Byte
0		Peripheral Qualifier						Peripheral Device Type (0)
		(0)						(Direct Access Device)
1							Page Code (83h)
2							Reserved
3						Page Length (24h for SCSI)
4				Reserved					Code Set (1)
5		Reserved			Association (0)				Identifier Type (2)
6							Reserved
7							Identifier Length (8h)
8 – 15				EUI-64 (Value Stored in Configuration Page 30h)
16				Reserved					Code Set (2)
17		Reserved			Association (0)				Identifier Type (1)
18							Reserved
19							Identifier Length (14h)
20 – 27						Vendor Identifier (“Maxtor “)
28 – 39							Drive Serial Number

5-24 Maxtor Atlas 10K V