Product EMI/EMC Qualifications:

Maxtor Corporation’s disk drive products meet all domestic and international electromagnetic emissions and immunity requirements. Maxtor’s disk drive products conform to the following EMI/EMC Standards

•CE Mark (Europe) is a Self Declaration as per Directive 89/336, EN55022: 1998 (Emissions) and EN55024: 1998 (Immunity).

•C-Tick Mark (Australia/New Zealand) is a Self Declaration as per AS/NZS3548: 1998.

•BSMI Mark (Taiwan) is a Self Declaration as per CNS 13438:1998.

•MIC Mark (Korea) is a Certificate of registration for SCSI disk drives.

•Maxtor’s disk drives are designed as a separate subassembly that conforms to the FCC Rules for Radiated and Conducted emissions, Part 15 Subpart J; Class B when installed in a given computer system.

•Maxtor drives conform to Canadian EMC Standard ICES-003.

2.4HARDWARE REQUIREMENTS

The Maxtor Atlas 10K V hard disk drive is compatible with host computers and controllers that provide a 68-pin Wide, or 80-pin SCA-2 interface. A 50-pin to 68- pin adapter is required to use the 68-pin Wide drive in a 50-pin cabling configuration.

Termination is required on the Maxtor Atlas 10K V hard disk drives as they do not support on-board SCSI termination.

Maxtor Atlas 10K V 2-5