Table
| Field Name | Value |
| Description | |
|
|
| ||
Peripheral Qualifier | 0 | |||
|
|
| ||
Peripheral Device | 0 | 0 indicates that this is a Direct Access Device. | ||
|
|
| ||
ANSI Version | 3 | ANSI SCSI Level 3 | ||
|
|
| ||
AERC | 0 | Asynchronous Event Reporting is not supported. | ||
|
|
| ||
NormACA | 0 | Does not support setting NACA in CDB Control word. | ||
|
|
| ||
Port | 0 | Only used when MultiP = 1. | ||
|
|
| ||
MultiP | 0 | This field set to 1 if it is a multiport device. | ||
|
|
| ||
Mchngr | 0 | Not embedded in or attached to a medium changer | ||
|
|
|
| |
Addr16 | 0/1 |
| ||
|
|
| ||
TrmTSK | 0 | TERMINATE TASK Function is not supported | ||
|
|
|
| |
Response Data | 2 | This Standard Inquiry Data is in the format specified in the International Standard. | ||
Format | ||||
|
|
| ||
|
|
| ||
RelAdr | 0 | Relative Addressing is not supported. | ||
|
|
| ||
WBus 16 | 0 or 1 | The WBus bit is 1 if the drive supports | ||
supports |
| |||
|
|
| ||
|
|
| ||
Sync | 1 | The drive supports Synchronous Data Transfers. | ||
|
|
| ||
Linked | 1 | Linked Commands are supported. | ||
|
|
| ||
CmdQue | 1 | The drive supports Tagged Command Queuing | ||
|
|
| ||
SftRe | 0 | The drive implements the hard reset option in response to assertion of the SCSI Bus reset | ||
line. |
| |||
|
|
| ||
|
|
|
| |
VS | 0 | Vendor Specific |
| |
|
|
|
| |
| The | ATLAS10K5_73WLS, ATLAS10K5_147WLS, ATLAS10K5_300WLS | ||
Product | value in | |||
|
| |||
Identification | this field | ATLAS10K5_73SCA, ATLAS10K5_147SCA, ATLAS10K5_300SCA | ||
| is: | |||
|
|
| ||
|
|
| ||
Clocking | 11 | The contents of this field define the setting of the | ||
ter 6). Note that the clocking field does not apply to asynchronous transfers of data. Op- | ||||
|
| tions available are: |
| |
|
|
|
| |
|
| Code | Description | |
|
| 00b | Indicates the device server supports only Single Transition | |
|
| 01b | (ST) | |
|
| Indicates the device server supports only Double Transition | ||
|
| 10b | (DT) | |
|
| Reserved | ||
|
| 11b | Indicates the device server supports ST and DT | |
|
|
|
| |
QAS | 1 (U160) | Quick Arbritrate Support. | If the value of this field is 1, it indicates that the device server | |
supports the quick arbitrate feature. A value of 0 indicates that the device server does not | ||||
|
| support this feature. 1 is default setting. | ||
|
|
| ||
IUS | 1 (U320) | Information Unit Supported. If the value of this field is 1, it indicates that the device server | ||
supports information units. A value of 0 indicates that the device server does not support | ||||
|
| information units. Default is 1. | ||
|
|
|
| |
Note: Vendor Information, Product Identification, and Product
Maxtor Atlas 10K V |