General Information
!WARNING
To avoid risk of electrical shock, personal injury or death from improper servicing, make sure you understand the proper procedures and usage of tools listed, before attempting any procedures described in the manual. Failure to understand and comply with safety information may result in severe personal injury or death.
TEST EQUIPMENT
The equipment required to service Maytag products depends largely upon the condition you encounter. Locating a malfunction will often require the use of electrical testing equipment such as:
Analog Test Meter
can be used to check for open or closed circuits, measure resistance, AC and DC volts, and temperature.
Digital Test Meter
can be used to check for open or closed circuits, measure resistance, AC and DC volts, and temperature.
DESCRIPTION | PART NUMBER | |
Analog Test Meter | 20000005 | |
Digital Test Meter | 20001001 | |
20000002 | ||
AC Voltage Sensor | 20000081 | |
Air Test Meter | 20000029 | |
Water Column | 038205 | |
Manometer | ||
|
AC Voltage Sensor
can be used to alert you if AC voltage is present so proper safety precautions can be observed. The tip of the sensor will glow bright red if voltage is between
Air Test Meter
can be used to check back pressure in the exhaust duct. Vent restriction can cause back pressure and disrupt normal operations of the dryer.
Water Column Manometer can be used to check gas pressure being supplied to the dryer and the outlet tap pressure on the gas valve.
8 
7 
6 
5 
4
3 
2 
1 
0
1 
2 
3 
4 
5 
6 
7 
8
12 | 16022904 Rev. 0 | ©2004 Maytag Appliances Company |
