Disassembly Procedures
!WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to unit before servicing.
4.Grasp the verticle sides of the front panel 3/4 of the way down and pull front panel away from the dryer.
Note: The front panel is held to the cabinet by means of clips secured to the front shroud. Small slots in the front panel engage the clips and hold the front panel in place.
Slot
Retaining
Clip
5.Tilt the top of the front panel away from the machine and lift the panel off two clips retaining the front panel to the base frame.
6.Disconnect wires to Door Switch.
3.Locate and remove two 5/16" hex head screws securing the two hold down brackets for the top cover.
4.To remove the hold down brackets, swing the bracket to the outside and unhook the bracket from the slot in the top cover lip.
Note: If the door is still positioned on the front shroud, open the door prior to lifting the front of the top cover and tilt the top cover toward the rear of the machine.
Top Cover
1.Disconnect power supply to unit.
2.Remove the front panel.
Shroud
Hold
Down
Bracket
Door Switch
1.Disconnect power supply to unit.
2.Remove Front Panel.
3.Remove wires from switch.
4.Squeeze tabs on switch together and remove switch.
40 | 16022904 Rev. 0 | ©2004 Maytag Appliances Company |
