Super Audio CD
The MVP861 allows the for establishing which sound for- mat (disc layer) is choosen when a hybrid Super Audio Compact Disc (SACD) is played back. The default setting is for SACD Multichannel Audio Tracks; to change from the Multichannel Setting perform the following:
1.Press the SETUP Push-button on the supplied Remote Control to access the On-Screen Disc Setup Menu.
Then press the Right directional Push-button to se- lect the Audio Setup Menu Icon Tab. Refer to figure 38.
Note: If there is a Disc playing in the MVP861 press the STOP Push-button twice before pressing the SETUP Push-button.
2. To change from the default setting use the Up or Down directional Push-buttons to select SUPER AUDIO CD followed by the SELECT Push-button.
The Stereo setting selects the SACD 2-Channel Audio Tracks. Selecting CD will playback the standard CD Audio Tracks. Refer to figure 39.
Notes: The title of the icon button-bar will change color from yellow (the cursor color) to green indicating the selected item. These settings may also be changed by using the Front Panel SACD/CD Push- button.
3.Return to the Audio Setup Menu by pressing the Up directional Push-button.
4.Next continue to the DIGITAL OUT SETUP Menu. If
no other changes are to be made in Setup Mode at this time, exit by pressing the Down directional Push- button to select the EXIT SETUP menu choice fol- lowed by the SELECT Push-button and the MVP861 will return to normal operation.
Note: The SETUP Push-button may be also pressed to exit the setup mode.
Digital Out
If the MVP861 is connected to a Digital-to-Analog Pro- cessing unit without Dolby Digital or DTS decoding capa- bilities the Digital Output of the MVP861 can be set to out- put a 2-Channel Digital Audio Signal known as PCM, in- stead of the Normal Dolby Digital or DTS Digital Bitstream Digital Audio Signal. To change from the default setting perform the following steps:
1. Press the SETUP Push-button on the supplied Remote Control to access the On-Screen Disc Setup Menu. Then press the Right directional Push-button to se- lect the Audio Setup Menu Icon Tab. Refer to figure 38.
Note: If there is a Disc playing in the MVP861 press the STOP Push-button twice before pressing the SETUP Push-button.
