How to Connect Video and AC Power
How to Connect Video and AC Power
1.Connect a
Note: The MVP861 Video Outputs may also be connected directly to a Monitor/TV if no Video Input Switching is available in the A/V Control Center.
2.Connect a Video Cable from the MVP861 Composite VIDEO OUTPUT to the Multizone Controller
Note: If a McIntosh Multizone Controller is not used, connect MVP861 Composite VIDEO OUTPUT to the A/V Control Center DVD Composite DVD VIDEO INPUT.
3.If you have an Audio/Video Control Center with Com- ponent Video Inputs, connect it as follows. If the Au- dio/Video Control Center does not have provisions for Component Video Switching, proceed to step 4 below. A. Connect a video cable from the MVP861 Y OUT- PUT to the Component Video Input of the McIn-
tosh A/V Control Center.
B. Connect a video cable from the MVP861 PB/CB OUTPUT to the PB Component Video Input of the McIntosh A/V Control Center.
C. Connect a video cable from the MVP861 PR/CR OUTPUT to the PR Component Video Input of the McIntosh A/V Control Center.
4.If you have a TV/Monitor and/or other Video Compo- nent with Component Video Inputs then connect as fol- lows:
A.Connect a video cable from the MVP861 Y OUT- PUT to the Y Component Video Input of the TV/ Monitor or other video component.
B.Connect a video cable from the MVP861 PB/CB OUTPUT to the PB Component Video Input of the TV/Monitor or other video component.
C.Connect a video cable from the MVP861 PR/CR OUTPUT to the PR Component Video Input of the TV/Monitor or other video component.
5.Connect the MVP861 power cord to a live AC outlet.
Note: When AC Power is initially applied to the MVP861 the unit will momentarily switch On and then go into the Standby Mode.
| McIntosh Multizone Controller |
|
| McIntosh A/V Control Center | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect to AC Outlet
To AC
Outlet
11
