McIntosh MVP861 owner manual Auto Power Mode, Slide Show

How to Set the Other Setup

Auto Power Mode

The MVP861 has a feature to switch itself Off 30 minutes after a disc has stopped playing (the stop mode). To acti- vate the Auto Power Mode feature perform the following steps:

1.Press the SETUP Push-button on the supplied Remote Control to access the On-Screen Disc Setup Menu.

Then press the Right directional Push-button to se- lect the “etc. Setup Menu Icon Tab”. Refer to figure 55.

Note: If there is a Disc playing in the MVP861 press the STOP Push-button twice before pressing the SETUP Push-button.

2. Use the Down directional Push-button followed by the SELECT Push-button on the Remote Control to se- lect the AUTO POWER MODE Menu. Refer to figure 59.

3. To change from the default setting of OFF use the

Up or Down directional Push-buttons to select ON followed by the SELECT Push-button.

Note: The title of the icon button-bar will change color from yellow (the cursor color) to green indicating the selected item.

4.Return to the Other Setup Menu by pressing the Up directional Push-button.

5.Next continue to the SLIDE SHOW Settings. If no

other changes are to be made in Setup Mode at this time, exit by pressing the Down directional Push- button to select the EXIT SETUP menu choice fol- lowed by the SELECT Push-button and the MVP861 will return to normal operation.

Note: The SETUP Push-button may be also pressed to exit the setup mode.

Slide Show

The MVP861 has a feature to view photos from a disc and the interval time between photos is adjustable from 5 to 15 seconds. To change the interval time perform the following steps:

1.Press the SETUP Push-button on the supplied Remote Control to access the On-Screen Disc Setup Menu.

Then press the Right directional Push-button to se- lect the “etc. Setup Menu Icon Tab”. Refer to figure 55.

Note: If there is a Disc playing in the MVP861 press the STOP Push-button twice before pressing the SETUP Push-button.

2. Use the Down directional Push-button followed by the SELECT Push-button on the Remote Control to se- lect the SLIDE SHOW Menu. Refer to figure 60.

Figure 55

Figure 59

Figure 60

40