McIntosh MVP861 owner manual How to Play a Sacd Disc, How to Play a CD Disc, How to Pause a Disc

Figure 68

Figure 69

Figure 70

Figure 71

Figure 72

Figure 73

Figure 76

How to Operate the MVP861

How to Play a SACD Disc

With a disc already loaded into the MVP861, press the PLAY Push-button on the Front Panel of the MVP861 or Remote Control. The

Disc will start playing the first selection of the SACD Layer; this could be either the Multichan- nel Tracks or 2- Channel Tracks depending on the disc contents.

To change from the default Multichannel Tracks to either SACD 2-Channel or CD Tracks, press the SACD/ CD Push-button on the Front Panel, until the desired track’s format title appears (Multi, Ste- reo or CD) on the alpha- numeric display. Refer to figures 68, 69, 70, 71, 72 and 73.

Note: SACD Discs played from now

on will refect this change, as the MVP861’s AUDIO SETUP Super Audio CD Setting records the desired format as the new default.

The Player will load the Table of Contents (Number of tracks and Total Playing Time) at this time. To start playing the desired format press the PLAY Push-button.

Note: Changing between the formats can be accomplished at any time by performing the above procedure.

How to Play a CD Disc

With a disc already loaded into the MVP861, press the PLAY Push-button on the Front Panel of the MVP861 or

Remote Control. Refer to figures 73, 74 and 76.

How to Pause a Disc

This feature allows the temporary stopping of disc playback. Refer to figures 74, 75 and 76.

1.When playing a Disc, press the PAUSE Push-button to tem- porarily stop playback.

Note: After the Pause Feature is activated, with a DVD- Video Disc in the MVP861, each additional press of the

PAUSE Push-button will permit the video to advance one frame at a time.

Figure 75

2. Press the PLAY Push-button to cancel Pause and resume playing the disc.

DVD-Video Rapid Frame Advance The MVP861 allows for rapid scan- ning of DVD Video Frames both for- ward or backward directions at differ- ent speeds.

1. When a disc is playing, press the PAUSE Push-button to stop playback.

2. Press the FF(Fast Forward) or REV(Reverse) Push-button to activate the Rapid Frame Advance.

Note: If the FF(Fast Forward) or REV(Reverse) Push- button is pressed several times, the speed of the Frame Advance will increase. An On-Screen Icon will appear during the Rapid Frame Advance Mode indicating the advance speed.

Figure 74

43