Miele G 7893 Guide to the machine

aConnection for DOS module K 60 at

the rear of the machine

bService panel

cFilter combination

dSalt reservoir

eDispenser for powder cleaning agent

fRinsing agent reservoir (with dosage

selector)

gRinsing agent level indicator

At the rear of the machine:

–Interface connector RS 232

(optional)

–Suction tube for external neutralising

agent container

Guide to the machine

Contents

Main Page Page Page Page Page Page Page ~ Page Intended use Page Guide to the machine Disposal of the packing material Disposal of your old machine Caring for the environment Electric door lock To open the door a , To close the door To open the door with the emergency release Opening and closing the door Programming the water softener Table of settings Filling the salt reservoir , Add salt indicator , Loading the machine , Water connection spring adapter Height adjustable top basket Laboratory utensils Page Page Page Page Page Page , Adding rinsing agent , Add rinsing agent indicator Setting the dosage Adding neutralising agent Page Adding cleaning agent , Dispensing powder cleaning agent , Switching on Starting the programme Programme sequence indicators Programme end Switching off Cancelling a programme , The following applies to all programmable functions: Resetting the operating hours counter for the filter in the drying unit Dispensing liquid cleaning agent via DOS 1 Dispensing neutralising agent via DOS 3 Buzzer Changing programme parameters Page Resetting to factory default settings Setting the time and date Process documentation Service Process validation Routine checks , Cleaning the filters in the wash cabinet , Page Cleaning the spray arms Cleaning the control panel , Cleaning the front of the machine , Cleaning the wash cabinet Cleaning the door seals Dispensing systems Baskets and inserts Drying unit (TA) - Maintenance , Page Page Page Page Page Page Page Page Thermal cut-out Cleaning the drain pump and non-return valve Cleaning the filters in the water inlet , After sales service , Building the machine under a continuous worktop Installation , Electrical connection Connection to the water inlet , Drainage Technical data Page Programme overview