Miele G 7893 Resetting to factory default settings

Resetting to factory default settings

Step Display / Result

^Press 0as often as necessary or hold it

pressed in until E33 appears in the display.

E33

^Turn the programme selector to a programme.

Factory default setting:

Electronics have been programmed to another

setting:

^Press ßwhen PP shows in the display. 00, the factory default settings

have been reinstated.

The water softener has been reset to the factory default setting. It will need to

be reprogrammed; see "Programming the water softener".

Programme changes which have been made to the freely programmable

Programmes A, B and C will be kept and will not be reset.

Programmable functions

Contents

Main Page Page Page Page Page Page Page ~ Page Intended use Page Guide to the machine Disposal of the packing material Disposal of your old machine Caring for the environment Electric door lock To open the door a , To close the door To open the door with the emergency release Opening and closing the door Programming the water softener Table of settings Filling the salt reservoir , Add salt indicator , Loading the machine , Water connection spring adapter Height adjustable top basket Laboratory utensils Page Page Page Page Page Page , Adding rinsing agent , Add rinsing agent indicator Setting the dosage Adding neutralising agent Page Adding cleaning agent , Dispensing powder cleaning agent , Switching on Starting the programme Programme sequence indicators Programme end Switching off Cancelling a programme , The following applies to all programmable functions: Resetting the operating hours counter for the filter in the drying unit Dispensing liquid cleaning agent via DOS 1 Dispensing neutralising agent via DOS 3 Buzzer Changing programme parameters Page Resetting to factory default settings Setting the time and date Process documentation Service Process validation Routine checks , Cleaning the filters in the wash cabinet , Page Cleaning the spray arms Cleaning the control panel , Cleaning the front of the machine , Cleaning the wash cabinet Cleaning the door seals Dispensing systems Baskets and inserts Drying unit (TA) - Maintenance , Page Page Page Page Page Page Page Page Thermal cut-out Cleaning the drain pump and non-return valve Cleaning the filters in the water inlet , After sales service , Building the machine under a continuous worktop Installation , Electrical connection Connection to the water inlet , Drainage Technical data Page Programme overview