^Remove the funnel and wipe any
residual salt off the seal and the
screw threads on the socket.
^Screw the cap back on firmly.
^Run the PRE-RINSE Dprogramme to
remove any traces of salt from the
cabinet.
The programme sequence may be
delayed for a few minutes after the
start of the PRE-RINSE D
programme. This is not a fault. The
water softener is being reactivated.
Add salt indicator
Reactivation takes place automatically
during a programme.
The programme sequence indicator
light aklights up whilst this is
happening.
^Add salt when the Add salt bk
indicator lights up.
Water softener
19